Standard or custom made bushings for your Modular Barrel Vise. We can supply you with just about any bushing you need to properly clamp onto any barrel under 1.350" in diameter.
Note: These bushings are included in the Modular Barrel Vise Kit.
- .865"-.870" Tapered Bushings
- .925"-.930" Tapered Bushings
- 1.000" Straight Bushings
- 1.200" Straight Bushings
- 1.250" Straight Bushings
Additional bushings in stock.
- .700"-.756" Tapered Bushings for light weight "Sporter" contours
- Tikka T3 Sporter contour.
- .956"-.965" Tapered Bushings, works great with most barrel contours, clamps around the barrel in front of the forend on most rifles.
- 1.075" Straight Bushings, Pre-fit barrels which have a 1.0625" contour at the chamber end.
- 1.130" Straight Bushings
- 1.350" Straight Bushings
The .700"-.756" tapered bushing is for "pencil" barrel contours which have a rapid reduction in diameter right in front of the largest diameter of the barrel on the chamber end. This bushing works great with Remington Sporter type contours about 5" to 6" in front of the action face.
The .865"-.870" tapered bushing is one of the more popular bushing sizes. It can be used on medium to light barrel contours like the Remington Sendero if a 1.250" bushing cannot be placed directly in front of the action face, the .865"-.870" bushing can be placed a few inches forward.
The .956"-.965" tapered bushing is for Accuracy International and similar contoured barrels which allow the barrel to be clamped in front of the handguard for easy removal. These bushings also work well with other larger diameter barrels like Heavy Palma and Heavy Varmint contours
The 1.130" straight bushing is for barrels similar to the FN SPR contour where the barrel is to be clamped directly in front of the action face.
The 1.200" straight bushing is one of the most popular bushing sizes. It is used to properly clamp M40, Sporter contours and most varmint contours in addition to any barrel with a straight section of 1.200" for more than 1.5" long.
The 1.250" straight bushing is one of the most popular bushing sizes. It is used to properly clamp MTU, Heavy Palma, Medium Palma, and any barrel with a straight section of 1.250" for more than 1.5" long.
The 1.350" straight bushing is used for larger contoured barrels for action such as the Surgeon XL which use a 1.350" barrel diameter. This bushing can be clamped directly in front of the action face.
**Some International Shipping is Available.
Please Send us an Email for International Orders Mark@shortactioncustoms.com **